First of all, I would like to thank Jorgy, over at Comply Foam for sending me the Plugs to review!
Here is the link to the Comply Foam Website for more technical information & a place where you can buy them from.
Here is the unboxing video:
First of all, I would like to thank Jorgy, over at Comply Foam for sending me the Plugs to review!
Here is the link to the Comply Foam Website for more technical information & a place where you can buy them from.
Here is the unboxing video:
Pros: Ultra portable, amazing bass contour settings, adds to the fullness of the SQ
Cons: Doesn’t drive well, fairly expensive, not as “clean” sounding as other amps out there
Packaging & Accessories: 7/10
Build Quality: 9/10
Design & Look: 9/10
Audio Quality: 9/10
Portability: 10/10
EMI (Interference with mobiles etc): 9/10 (higher rating means lower EMI)
Transparency (Plays same sound as source): 6/10 (higher rating means it’s close to the source)
Battery life: 8/10
Hissing: 8/10 (higher rating means lower hissing)
Value: 8/10
My final Rating: 10/10
Purchase Date: February 2012
Purchase Price: £72
Pros: Excellent sub-bass, lightweight, highs, isolation, assortment of tips
Cons: Design, look, microphonics, soundstage
Packaging & Accessories: 8/10
Build Quality: 7/10
Design & Look: 6/10
Microphonics (higher ratings means lower cable noise): 8/10
Isolation: 9/10
Comfort: 10/10
Audio Quality: 8.5/10
Value: 8/10 (If bought new) – 10/10 (at a discounted price)
My final Rating: 8.5/10
Purchase Date: February 2012
Purchase Price: £60
Here is where I bought it from
These do wonders for portable audio solutions!
Thanks to Tyll from InnerFidelity for the initial heads-up!
Here are the pictures of my portable setup!
You will see the Dual Lock, attaches my digizoid ZO2 and my Samsung Galaxy S quite well – I also have a custom made interconnect
UPDATE:
I decided to sell my SGS i9000, and thus had to remove the 3M Dual Lock, on the back of my phone – it wasn’t a simply process and didn’t come off easily. Luckily enough, my SGS backplate, comes off, and thus I dunked it into so hot (not boiling) water, and after 15mins, the adhesive foam material came right off, with ease!
Thus, do bear that in mind, when putting this on a surface that cannot be wet – ie. on electronic devices!
Enjoy!
–TotallydubbedHD
I hope you enjoyed the video 🙂
1.3.3 thread (DaxIΠFIΠITY)
1.4.0 thread (be18)
I have a flashing guide for 1.3.3, which also applies to 1.4
Check it out 😀
Enjoy!
–TotallydubbedHD